Please can anybody advise me whether the rear axle outer bearing retainer threads, in the ends of the axle housing, are left-hand / right-hand threaded side to side. I have to remove the castellated bearing retainers to access the inner seals – because axle grease is leaking all over the rear brakes! I have removed the clamp bolt, (dduuhhh…), and made a special tool from thick-walled steel tube, but the retainer will not move. The visible threads on my car are so worn I cannot tell, looking at either side, if they are left-hand or right-hand threads.
Attachments: |
DSC02418_c.jpg [ 252.4 KiB | Viewed 13164 times ]
|
|