View topic - Dodge and Graham Brothers Truck data needed

dodgebrothersclub.org
http://www.dodgebrothersclub.org/phpbbforum/

Dodge and Graham Brothers Truck data needed
http://www.dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=328
Page 1 of 1

Author:  DavidYoung [ Fri Jun 05, 2015 10:37 pm ]
Post subject:  Dodge and Graham Brothers Truck data needed

Some of you know that we are working on attempting to compile data for trucks in hopes of answering questions for truck owners.
Info still needed for those who haven't input.

Info that we are requesting is as follows:

1.) Frame or serial number
2.) Wheelbase
3.) Engine #
4.) Toe Plate or Build card data

Thank you to those of you who have replied over the past 2-4 years.
Please reply to this post or you can PM me
Or email me at:
1930DA124@cox.net

You can also contact me on the AACA forum via PM:
My screen name there is 30dodgepanel

Please, this is very important that we continue to have input.
We appreciate all data and all input, thank you.

Regards,
David Young

Author:  DavidYoung [ Tue Jun 16, 2015 11:25 am ]
Post subject:  Re: 1928-1932 Dodge and Graham Brothers frame numbers needed

Thanks to some of you who have input.

Sherman S.
Doug W.
Harry W.
Aaron C.
Tom S.
Glen
Kevin

Need many more, please help.

Author:  DavidYoung [ Sun Sep 03, 2017 8:47 pm ]
Post subject:  Re: Dodge and Graham Brothers Truck data needed

Bumping this thread.

I've edited it in hopes truck owners will become active in providing truck data.

Please, please, please - can those of you who haven't contacted me please reply either here on this post or contact me with any data.

We cannot stress how important this project is.

I'll start it off. This is what is needed:

My Frame #: D231,751
My wheelbase: 124"
My engine # H146,715 (this is my original engine # based on build card)
I did not have a toe plate but my build shows built on March 11 1930 and had my frame #, engine number and model code B124.
Build cards can be ordered from the Chrysler museum.

Thank you for your help,
David

Author:  Harry_Hill [ Mon Sep 04, 2017 2:57 pm ]
Post subject:  Re: Dodge and Graham Brothers Truck data needed

no frame number
wheel base 109"
engine number UT4407
no build plate

Author:  DavidYoung [ Mon Sep 04, 2017 2:58 pm ]
Post subject:  Re: Dodge and Graham Brothers Truck data needed

Why no frame # ? How about the serial # or the firewall tag ?

Feel free to email or PM me if you'd prefer.

Author:  Harry_Hill [ Mon Sep 04, 2017 5:47 pm ]
Post subject:  Re: Dodge and Graham Brothers Truck data needed

DavidYoung wrote:
Why no frame # ? How about the serial # or the firewall tag ?

Feel free to email or PM me if you'd prefer.


no firewall tag, no serial number. Don't ask me why, this is the way it came. I found an old registration, just a piece of it, under the seat and it had the number on the side of the engine as the serial number. I know there is supposed to be number on the frame under the seat but there isn't.

Author:  DavidYoung [ Wed May 01, 2019 6:18 pm ]
Post subject:  Re: Dodge and Graham Brothers Truck data needed

Over 5,000 views and only one direct response to this request ?

Still looking for any owners of Graham or Dodge Brothers trucks who have not input they're information yet.

Again, thanks for any help

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/