View topic - 1919 dodge valve inserts

dodgebrothersclub.org
http://www.dodgebrothersclub.org/phpbbforum/

1919 dodge valve inserts
http://www.dodgebrothersclub.org/phpbbforum/viewtopic.php?f=3&t=471
Page 1 of 1

Author:  OdellOvergaard [ Mon Oct 02, 2017 2:29 pm ]
Post subject:  1919 dodge valve inserts

I have had to remove valve guides do to a stuck valve in my 1919 Dodge. I am looking for easiest way to put in new guides. Checked with auto machine shop and they want me to remove motor and tear down to bare block. I would really not like to do that if possible. Anyone out there have a suggestion on how to install the guides?

Author:  VernBarker [ Wed Oct 25, 2017 3:51 pm ]
Post subject:  Re: 1919 dodge valve inserts

To remove the guides after valves are remove is to cut/brake off the guide with a chisel then drive the remaining guide out.be sure to maintain 1-7/16 from the top of cylinder block when installing the guide.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/