View topic - 23 screenside help needed

It is currently Mon Dec 18, 2017 2:14 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Fri Nov 14, 2014 5:49 pm 
Offline

Joined: Fri Nov 14, 2014 4:58 pm
Posts: 7
i need photos of a 23 screenside rear fender mounting points and overall views as i need both rear fenders for my truck. also i need to verify that i measured my wheels at 23 1/4 inch across and 2 3/4 rim width and have been told that i need 24" split rims and 32x4 tires and tubes if so i need used rims tires and tubes that size .Finally,my floor mounted starter switch button does not spring back and i see no spring between bottom side of button and switch,should there be or why is my button not springing back? thanks for any help sharpy 740 663-5010


Top
 Profile  
Reply with quote  
PostPosted: Sun Nov 16, 2014 1:54 am 
Offline

Joined: Sat Feb 11, 2012 5:19 am
Posts: 12
In the 1921 Master Parts Book, there is a photo of a floor starter switch and from the looks of it the spring is on the inside. I know your Dodge is a year or two newer but I think the spring is on the inside. I hope this information helps. Good Luck Dennis Schmidt


Top
 Profile  
Reply with quote  
PostPosted: Wed Dec 17, 2014 10:29 am 
Offline

Joined: Fri Nov 14, 2014 4:58 pm
Posts: 7
Thanks,dennis, spring was inside and my bushing( wich i did not even realize was a bushing/collar ) was stuck in holding the spring down. this in turn burnt the relay inside.I have freed the bushing and replaced the relay and all is well .I still need 2 of the 24" split rims and 4 used tires and tubes 32x4 keep me in mind.Thanks,Sharpy


Top
 Profile  
Reply with quote  
PostPosted: Mon Sep 04, 2017 2:49 pm 
Offline

Joined: Thu Mar 21, 2013 7:06 pm
Posts: 17
Hi Joseph ,

Can you please provide us with data info on your truck ? We need ALL truck owners input if you know others that have DB or GB trucks.

http://www.dodgebrothersclub.org/phpbbf ... ?f=3&t=328

Thank you
Regards,
David


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group